NEC Express 5800 User Manual page 200

Confirmation of mirror status
2.
To check the redundancy status of the failed mirror disk, open [Mirror Disk] screen under
[FTServer]. On this screen, you can check the redundancy status of the mirror and the
status of the mirrored hard disks.
IMPORTANT:
The mirroring redundancy status will change depending on the status of the two hard disks
that make up a mirror as follows:
Status of hard disk 1
Duplex
Simplex
Others
"-": No status is shown.
Unless the hard disks make up a mirror, the Mirror Disk screen does not show any
TIPS:
information.
Installing and Using Utilities
[Mirror Disk]
Status of hard disk 2
Duplex
Simplex
Others
Duplex
Simplex
Others
Duplex
Simplex
Others
Status of mirror volume
Normal
-
Warning
-
Normal
Warning
Warning
Warning
-
5-37