NEC Express 5800 User Manual page 162

How to Clear Passwords
1.
Power off NEC Express5800/ft series and unplug the both power cords.
2.
Remove the both PCI modules (#1 and #2) from the NEC Express5800/ft series (see page
8-29 "Removing PCI Module").
3.
Open the top cover of the PCI Module #1.
4.
Make setting of jumper switch for clearing the password.
Remove the clips from the jumper pins 11-12 and place them on the jumper pins 3-4 on
the PCI Module #1.
5.
Mount the PCI Module #1 to NEC Express5800/ft series (see page 8-31 "Installing PCI
Module").
6.
Plug the both power cords and when the POWER Switch LED turns on, press it to power
on NEC Express5800/ft series.
7.
When the following POST screen appears after the startup, press the POWER Switch to
turn off the power.
8.
Unplug the both power cords.
9.
Remove PCI Module #1 from NEC Express5800/ft series (see page 8-29 "Removing PCI
Module").
10.
Reset the jumper switch setting.
Remove the clips from the jumper pins 3-4 and place them on the jumper pins 11-12 on
the PCI Module #1.
TIPS:
If you place it on other pins, the server may malfunction.
System Configuration 4-43