NEC Express 5800 User Manual page 352

Supplement
Before using backup devices:
If any of following backup devices is used for internal SCSI connector of NEC Express5800/ft
series, you may need to update your firmware for backup devices.
If your backup device to be connected is any of the following models, refer to the manual_E.pdf in
your attached NEC Express Builder (CD-ROM). That file describes detailed procedures to update
your firmware.
List of backup devices and firmware
Model #
N8151-29F
N8151-34AF
N8151-36F
N8151-39F
N8151-45F
N8151-46F
N8151-41AF
All tape devices are needed to update the firmware if the firmware revision is older than
above.
NEC Model Name
Built-In AIT Auto Loader
Built-In AIT
Built-In AIT Auto Loader
Built-In DAT Auto Loader
Built-In DAT
Built-In AIT
Built-In AIT
System Upgrade
Latest Firmware Revision
L1nb
07n6
L7n7
L2n4
02n9
01nm
01nm
8-51