Detection Area Of The Transmissive Sensor - Toshiba B-EX4T1 Series Owner's Manual

7. SUPPLY SPECIFICATIONS

7.1.2 Detection Area of the Transmissive Sensor

The Transmissive Sensor is movable from the centre to the left edge of media.
The Transmissive Sensor detects a gap between labels, as illustrated below.
<Label>
(Min. 6.0 mm when using
the cutter module.)
<Tag paper with square holes>
NOTE:
Round holes are not acceptable.
Area to be detected.
Sensor position
Min. 2.0 mm
Min. 12 mm
Sensor position
Min. 2.0 mm
Min. 12 mm
Centre of media
Label
Gap
Label
Sensor is movable
within this range.
Centre of media
Sensor is movable
within this range.
E7- 3
ENGLISH VERSION EO1-33089
Print side
Media feed direction
Print side
Square holes
(Round holes are not acceptable.)
Media feed direction
7.1 Media