Real Time Clock (Rtc) - Toshiba B-EX4T1 Series Owner's Manual

2. PRINTER SETUP

2.6.11 Real Time Clock (RTC)

SYSTEM MODE
<8>BASIC
<9>FOR FACTORY
<10>RFID
<11>RTC
The RTC menu allows setting the date and time, enabling the battery
check function, and selecting the RTC data renewal timing while printing.
The Real Time Clock Setting is effective only when an optional RTC &
USB Host Interface Card, B-EX700-RTC-QM-R, is installed.
(1) DATE TIME
This parameter is to set date and time.
YY/MM/DD
Hh:mm:ss
(2) BATTERY CHECK
This parameter is to choose whether or not to enable the low battery
check function.
• OFF
• ON
(3) RENEWAL
This parameter is to choose when date and time are updated while
printing.
• BATCH
• PAGE
E2-38
ENGLISH VERSION EO1-33089
00 00
00 00
As the real time clock data is read only for the
first media in a batch the same time is printed on
the all media.
As the real time clock data is read at the start of
printing each media, a real time can be printed on
each media.
2.6 Printer Setting
00 [RIGHT]
00