7. SUPPLY SPECIFICATIONS
7. SUPPLY SPECIFICATIONS
7.1 Media
Please make sure that the media being used is approved by TOSHIBA TEC. The warranty does not apply when a
problem is caused by using media that is not approved by TOSHIBA TEC.
For information regarding TOSHIBA TEC approved media, please contact a TOSHIBA TEC authorised service
representative.
7.1.1 Media Type
Two types of media can be loaded for this thermal transfer and direct thermal printer: label or tag. The table
below shows size and shape of the media available for this printer.
Stop
position
Cut position
B-EX4T-GS12-QM-R
Item
Media pitch
Label length
Tag/Backing paper width
Label width
Gap length
Black mark length (Tag paper)
Max. effective print width
Effective print length
Print speed up/slow down area
Thickness
Maximum effective length for on the fly issue
Maximum outer roll diameter
Roll direction
Inner core diameter
Label
Label dispensing mode
Batch mode
Label
10.0 – 1500.0
Tag
10.0 – 1500.0
8.0 – 1498.0
30.0 – 120.0
Label
6.0 – 1496.0
Tag
8.0 – 1498.0
Label
Tag
Black Mark
(on reverse side)
Stop
position
Cut position
Feed Direction
Strip mode
3"/s.: 87.0 - 1500.0
25.4 – 256.0
6"/s.: 99.0 – 1500.0
----
3"/s.: 81.0 – 1494.0
23.4 – 1498.0
6"/s.: 93.0 – 1494.0
50.0 – 120.0
2.0 – 20.0
21.4 – 252.0
6"/s.: 91.0 – 1492.0
----
1.0 (Slow down shall be 1.5 when the print speed is 14 ips.)
0.08 – 0.263 (30 to 50 mm width)
Ø200 (Ø180 when using the built-in Rewinder)
E7- 1
ENGLISH VERSION EO1-33089
Tag paper
Cut mode
Rotary cutter
Head-up disabled
Head-up enabled
38.0 – 1500.0
30.0 – 1500.0
25.0 – 1494.0
30.0 – 120.0
27.0 – 117.0
6.0 – 20.0
2.0 – 10.0
104.0 ±0.2
3"/s.:79.0 - 1492.0
23.0 – 1492.0
28.0 – 1498.0
0.08 – 0.17
749.0
Inside (standard)
Ø76.2±0.3
7.1 Media
Black Mark
(on reverse side)
[Unit: mm]
Disc cutter
25.4 – 1500.0
25.4 – 1500.0
23.4 – 1494.0
21.4 – 1492.0
21.40 – 1498.0