Optional Cutter Module - Toshiba B-EX4T1 Series Owner's Manual

4. MAINTENANCE

4.1.3 Optional Cutter Module

WARNING!
1. Be sure to turn the power
off before cleaning the
Cutter Module.
2. As the cutter blade is
sharp, care should be
taken not to injure yourself
while cleaning.
The disc cutter and rotary cutter are available as an option. They are both
cleaned in the same way. When removing the Cutter Cover of the rotary
cutter unit, remove the screws from the bottom of the cover.
1. Loosen the two Plastic Head Screws to remove the Cutter Cover.
2. Remove the jammed paper.
3. Clean the Cutter with a soft cloth slightly moistened with alcohol.
4. Attach the Cutter Cover.
E4- 3
ENGLISH VERSION EO1-33089
Plastic Head Screw
4.1 Cleaning
Cutter Unit