Toshiba B-EX4T1 Series Owner's Manual page 109

APPENDIX 1 MESSAGES AND LEDS
LCD Message
No.
21 POWER FAILURE
22 EEPROM ERROR
23 SYSTEM ERROR
DHCP CLIENT
24
INITIALIZING...
25 RFID WRITE ERROR
26 RFID ERROR
27 LOW BATTERY
28 INPUT PASSWORD
PASSWORD INVALID
29
Please Power OFF
NOTE: When an error message listed above appears on the LCD message display, please refer to Section 5
TROUBLESHOOTING for solution.
LED Indication
ONLINE ERROR
A power failure has occurred.
Data cannot be read from/written to a
backup EEPROM properly
When the following abnormal
operations are performed, a system
error occurs:
(a) Command fetch from an odd
address
(b) Access to word data at an odd
address
(c) Access to long-word data at an
odd address
(d) Access to the area of 80000000H
to FFFFFFFFH in the logic space
in user mode.
(e) An undefined instruction in an
area other than a delay slot was
decoded.
(f) An undefined instruction in a
delay slot was decoded.
(g) An instruction to rewrite a delay
slot was decoded.
DHCP Client is being initialised. (Only
when the DHCP is enabled.)
The printer did not succeed in writing
data onto an RFID tag after having
retried for a specified times.
The printer cannot communicate with
the RFID module
The voltage of the Real Time Clock
Battery is low level.
The printer is waiting for a password to
be entered.
A wrong password was entered
consecutively for three times.
EA1- 2
APPENDIX 1 MESSAGES AND LEDS
Printer Status
ENGLISH VERSION EO1-33089
Acceptance of
Restoration by
Status Request/
RESTART key
Reset Command
Yes/No Yes/No
No No
No No
No No
----- -----
Yes Yes
Yes Yes
No Yes
No No
No No