Toshiba B-EX4T1 Series Owner's Manual page 36

2. PRINTER SETUP
2.6.2 Parameter Setting
(Cont.)
(16) XML
This parameter is to choose a type of XML data to be printed.
• OFF
Disables XML data printing.
• STD
Standard specification
• ORACLE
Oracle
• SAP
SAP
• STD EXT
Standard specification (External memory)
• ORACLE EXT Oracle using an external memory
• SAP EXT
SAP using an external memory
(17) THRESHOLD SELECT
This parameter is to choose which threshold value for the media
sensor to validate.
• REFLECT
Reflective sensor
• TRANS.
Transmissive sensor
Then, choose which value to use.
• MANUAL SET
• COMMAND SET
(18) ENERGY TYPE
This parameter is to choose an energy level applied to the print head.
• TRANSFER
Thermal transfer print method →
• DIRECT
Thermal direct print method →
When TRANSFER is selected for the Energy type parameter,
choose a ribbon type.
• Semi resin1
• Semi resin2
• Resin1
• Resin2
• Reserve1 to Reserve6
When DIRECT is selected for the Energy type parameter
• Standard
• Reserve1 to Reserve9
(19) PW SAVE TIME
This parameter is to set the length of time until the printer enters the
sleep mode. (Unit: minute)
240 min.
239 min.
2 min.
1 min.
E2-22
ENGLISH VERSION EO1-33089
Threshold set in the Threshold mode takes
effect.
Threshold set by command takes effect.
Semi-resin 1
Semi-resin 2
Resin 1
Resin 2
Reserved
Standard
Reserved
2.6 Printer Setting