Enabling Z-Mode - Toshiba B-EX4T1 Series Owner's Manual

2. PRINTER SETUP
2.6.4 Basic Program Setting
(Cont.)

2.6.5 Enabling Z-Mode

USER SYSTEM MODE
<3>ADJUST SET
<4>LAN/WLAN
<5>BASIC
<6>Z-MODE
(3) TRACE
This parameter is to choose whether to enable tracing the BASIC
program.
• OFF
Disables tracing the BASIC program.
• ON
Enables tracing the BASIC program.
(4) EXPAND MODE
The printer switches the mode to execute the BASIC program.
The Z-Mode menu allows selecting whether or not to enable the Z-Mode
(Zebra converter) .
(1) Z-MODE
• OFF
• ON SETTING OFF
• ON SETTING ON
E2-25
ENGLISH VERSION EO1-33089
Z-Mode is disabled.
Z-Mode is enabled. BASIC system mode
program is not started immediately.
Z-Mode is enabled. BASIC system mode
program is started immediately.
2.6 Printer Setting