Avaya AP-4 User Manual page 49

ScanTool Instructions
Follow these steps to install ScanTool, initialize the Access Point, and
perform initial configuration:
1. Locate the unit's Ethernet MAC address and write it down for future
reference. The MAC address is printed on the product label. Each
unit has a unique MAC address, which is assigned at the factory.
2. Confirm that the AP is connected to the same LAN subnet as the
computer that you will use to configure the AP.
3. Power up, reboot, or reset the AP.
— Result: The unit requests an IP Address from the network
DHCP server.
4. Insert the Installation CD into the CD-ROM drive of the computer
that you will use to configure the AP.
— Result: The installation program will launch automatically.
5. Follow the on-screen instructions to install the Access Point
software and documentation.
Avaya Wireless AP-4/5/6 User's Guide
Initialization
2-19