Avaya AP-4 User Manual page 256

RADIUS
5. Select a MAC Address Format Type. This should correspond to
the format in which the clients' 12-digit MAC addresses are listed
within the RADIUS server. Available options include:
— Dash delimited: dash between each pair of digits:
xx-yy-zz-aa-bb-cc
— Colon delimited: colon between each pair of digits:
xx:yy:zz:aa:bb:cc)
— Single dash delimited: dash between the sixth and seventh
digits: xxyyzz-aabbcc
— No delimiters: No characters or spaces between pairs of
hexadecimal digits: xxyyzzaabbcc
6. Select a Server Addressing Format type (IP Address or Name).
— If you want to identify RADIUS servers by name, you must
configure the AP as a DNS Client. See
7. Enter the server's IP address or name in the field provided.
8. Enter the port number which the AP and the server will use to
communicate. By default, RADIUS servers communicate on port
1812.
9. Enter the Shared Secret in the Shared Secret and Confirm
Shared Secret field. This is a password shared by the RADIUS
server and the AP. The same password must also be configured on
the RADIUS server.
10. Enter the maximum time, in seconds, that the AP should wait for
the RADIUS server to respond to a request in the Response Time
field. Range is 1-10 seconds; default is 3 seconds.
4-158
DNS Client
Avaya Wireless AP-4/5/6 User's Guide
for details.