Avaya AP-4 User Manual page 147

Hide thumbs Also See for AP-4:

Table of Contents

Transmit Rate

Avaya Wireless AP-4/5/6 User's Guide

When Auto Channel Select is enabled, this field

is read-only and displays the Access Point's

current operating channel. When Auto Channel

Select is disabled, you can specify the Access

Point's operating channel. If you decide to

manually set the unit's channel, ensure that

nearby devices do not use the same frequency

(unless you are setting up a WDS). Available

Channels vary based on regulatory domain.

802.11g Channel

Select a specific transmit rate for the AP. The

values available depend on the Operational

Mode. Auto Fallback is the default setting; it

allows the AP to select the best transmit rate

based on the cell size.

• For 802.11b only -- Auto Fallback, 1, 2,

5.5, 11 Mbits/sec

• For 802.11g only -- Auto Fallback, 6, 9,

12, 18, 24, 36, 48, 54 Mbits/sec

• For 802.11b/g and 802.11g-wifi -- Auto

Fallback, 1, 2, 5.5, 6, 9, 11, 12, 18, 24, 36,

48, 54 Mbits/sec

Frequencies.

Troubleshooting