Avaya AP-4 User Manual page 379

CLI Commands
The following message is displayed every time you configure an object
that requires the device to be rebooted.
[Device-Name]> set ipaddr 135.114.73.10
The following elements require reboot
ipaddr
In addition to the above informational message, the CLI also provides a
message as a result of the exit, quit, or done command if changes have
been made to objects that require reboot. If you make changes to objects
that require reboot and execute the exit command the following message
is displayed:
[Device-Name]> exit<CR> OR quit<CR> OR done<CR>
Modifications have been made to parameters that require the
device to be rebooted. These changes will only take effect after
the next reboot.
Examples
[Device-Name]> set sysloc "Main Lobby"
[Device-Name]> set mgmtipaccesstbl 0 ipaddr 10.0.0.10 ipmask
255.255.0.0
Avaya Wireless AP-4/5/6 User's Guide A-33