Avaya AP-4 User Manual page 117

You can configure and view the following parameters within the Link
Integrity Configuration screen:
Parameter
Enable Link
Integrity
Poll Interval
(milliseconds)
Poll
Retransmissions
Target IP Address
Entry
Avaya Wireless AP-4/5/6 User's Guide
Description
Place a check mark in the box provided to
enable Link Integrity.
The interval between link integrity checks.
Range is 500 - 15000 ms in increments of
500 ms; default is 500 ms.
The number of times a poll should be
retransmitted before the link is considered
down. Range is 0 to 255; default is 5.
This entry specifies the IP address of a host
on the network that the AP will periodically
poll to confirm connectivity. The table can
hold up to five entries. By default, all five
entries are set to 0.0.0.0. Click Edit to update
one or more entries. Each entry contains the
following field:
• Target IP Address
• Comment (optional)
• Status: Set this field to Enable to
specify that the Access Point should poll
this device. You can also disable an
entry by changing this field's value to
Disable.
Network
4-19