Avaya AP-4 User Manual page 364

Hide thumbs Also See for AP-4:

Table of Contents

Example 3b. Displaying parameters based on letter sequence

This example shows entries for parameters that start with the letter "i".

The more letters you enter, the fewer the results returned. Notice that

there is no space between the letters and the question mark.

[Device-Name]> show ipa?

Figure A-6. Result of "show ipa?" CLI command

[Device-Name]> show iparp?

Figure A-7. Result of "show iparp?" CLI command

Example 4. Displaying prompts for successive parameters

Enter the command, a space, and then ?. Then, when the parameter

prompt appears, enter the parameter value. Result: The parameter is

changed and a new CLI line is echoed with the new value (in the first part

of the following example, the value is the IP Address of the TFTP server).

Avaya Wireless AP-4/5/6 User's Guide

Troubleshooting