Avaya AP-4 User Manual page 109

Hide thumbs Also See for AP-4:

Table of Contents

If you prefer to use host names to identify network servers rather than IP

addresses, you can configure the AP to act as a Domain Name Service

(DNS) client. When this feature is enabled, the Access Point contacts the

network's DNS server to translate a host name to the appropriate network

IP address. You can use this DNS Client functionality to identify RADIUS

servers by host name. See

Avaya Wireless AP-4/5/6 User's Guide

The Access Point's subnet mask. When IP

Address Assignment Type is set to Dynamic,

this field is read-only and reports the unit's

current subnet mask. The subnet mask will

default to 255.255.0.0 if the unit cannot

obtain one from a DHCP server.

The IP address of the Access Point's

gateway. When IP Address Assignment Type

is set to Dynamic, this field is read-only and

reports the IP address of the unit's gateway.

The gateway IP address will default to

169.254.128.133 if the unit cannot obtain an

address from a DHCP server.

for details.

Troubleshooting