Avaya AP-4 User Manual page 156

Hide thumbs Also See for AP-4:

Table of Contents

RTS/CTS Medium

Closed System

The Deferred Traffic Indicator Map (DTIM) is

used with clients that have power

management enabled. DTIM should be left at

1, the default value, if any clients have power

management enabled. This parameter

supports a range between 1 and 255.

This parameter affects message flow control

and should not be changed under normal

circumstances. Range is 0 to 2347. When set

to a value between 0 and 2347, the

Access Point uses the RTS/CTS mechanism

for packets that are the specified size or

greater. When set to 2347 (the default

setting), RTS/CTS is disabled. See

Medium Reservation

Check this box to allow only clients

configured with the Access Point's specific

Network Name to associate with the

Access Point. When enabled, a client

configured with the Network Name "ANY"

cannot connect to the AP. This option is

disabled by default.

for more information.

Avaya Wireless AP-4/5/6 User's Guide

Troubleshooting