Avaya AP-4 User Manual page 369

NOTE:
If you have not previously configured the Access Point's IP address
and do not have a DHCP server on the network, the Access Point
will default to an IP address of
2. Go to the DOS command prompt on your computer.
3. Type telnet <IP Address of the unit>.
4. Enter the CLI password (default is public).
NOTE:
Avaya recommends changing all default passwords immediately.
See the following sections for information on how to change the
default passwords:
— CLI password, see passwd.
— SNMP passwords (read, read-write, and SNMPv3
authentication and privacy), see
— HTTP password, see
Avaya Wireless AP-4/5/6 User's Guide
169.254.128.132
SNMP
HTTP and HTTPS
Accessing the AP CLI
.
Commands.
Commands.
A-23