Avaya AP-4 User Manual page 164

Management
Type
SNMPv3 Privacy
Password
Telnet (CLI)
Password
HTTP (Web)
Password
NOTE:
For security purposes Avaya recommends changing ALL
PASSWORDS from the default "public" immediately, to restrict
access to your network devices to authorized personnel. If you
lose or forget your password settings, you can always perform
the Reset to Factory Default
4-66
Description
For sending encrypted SNMPv3 data. Enter
a password in both the Password field and
the Confirm field. The default password is
"public". Password length is recommended
to be at least 8 characters. Secure
Management (Services tab) must be
enabled to configure SNMPv3.
For the CLI interface (via serial or Telnet).
Enter a password in both the Password
field and the Confirm field. The default
password is "public".
For the Web browser HTTP interface. Enter
a password in both the Password field and
the Confirm field. The default password is
"public".
Procedure.
Avaya Wireless AP-4/5/6 User's Guide
2 of 2