Avaya AP-4 User Manual page 458

802.11b Wireless Interface Commands
• 100% of the maximum transmit power level of the card
• 50%
• 25%
• 12.5%
Perform the following commands to enable TX Power Control and set the
transmit power level:
[Device-Name]> set txpowercontrol enable
[Device-Name]> set wif <interface number> currenttxpowerlevel
<value>
Allowed values are: 1 (100%), 2 (50%), 3 (25%), 4 (12.5%)
Autochannel Select (ACS)
ACS is enabled by default. Reboot after disabling or enabling ACS.
[Device-Name]> set wif <index> autochannel <enable/disable>
[Device-Name]> reboot 0
Enable/Disable Closed System
[Device-Name]> set wif <index> closedsys <enable/disable>
A-112 Avaya Wireless AP-4/5/6 User's Guide