Avaya AP-4 User Manual page 227

Interface's Configure > SSID/VLAN/Security Mode/Wireless A/B
screen and describes how each of these options correspond to the six
Security Modes listed above:
Authentication Mode
Setting
None
802.1x
Mixed
WPA
WPA-PSK
NOTE:
Before enabling the 802.1x, Mixed, or WPA mode, the 802.1x server
should be configured. Set the encryption key in Mixed mode after
the authentication is set to Mixed mode.
Avaya Wireless AP-4/5/6 User's Guide
Authentication
Method Employed
None
802.1x
802.1x or None
(depends on a client's
configuration)
802.1x
Manually configured
Pre-shared Key
Security
Encryption Method
Employed
None or manually
configured Static WEP
settings
Dynamic WEP Keying
Dynamic WEP Keying
or Static WEP
(depends on client's
configuration)
Dynamic TKIP Keying
Dynamic TKIP Keying
4-129