Avaya AP-4 User Manual page 342

Hide thumbs Also See for AP-4:

Table of Contents

Recovery Procedures

3. Press the RESET button on the AP (see

to identify the location of the RESET button).

Result: The terminal display shows Power On Self Tests (POST)

activity, and then displays a CLI prompt, similar to the example

below. This process may take up to 90 seconds.

[Device-Name]>

4. Enter the CLI password (default is public).

Result: The terminal displays a welcome message and then the

[Device-Name]

5. Enter show ip. Result: Network parameters appear:

Figure 7-2. Result of "show ip" CLI Command

6. Change the IP address and other network values using set and

reboot CLI commands, similar to the example below (use your

own IP address and subnet mask). Note that IP Address Type is

set to Dynamic by default. If you have a DHCP server on your

Please enter password:

RELOAD and RESET

Avaya Wireless AP-4/5/6 User's Guide

Troubleshooting