Avaya AP-4 User Manual page 124

Hide thumbs Also See for AP-4:

Table of Contents

Auto Channel

The AP scans the area for other

Access Points and selects a free or relatively

unused communication channel. This helps

prevent interference problems and increases

network performance. By default this feature

is enabled. See

802.11a Channel

for a list of Channels.

You cannot disable Auto Channel Select for 802.11a

products in Europe

Selection (DFS)

When Auto Channel Select is enabled, this

field is read-only and displays the

Access Point's current operating Channel.

When Auto Channel Select is disabled, you

can specify the Access Point's channel. If

you decide to manually set the unit's

Channel, ensure that nearby devices do not

use the same frequency. Available Channels

vary based on regulatory domain. See

802.11a Channel

Note that you cannot manually set the

channel for 802.11a products in Europe (see

Dynamic Frequency Selection (DFS)

(see Dynamic Frequency

for details).

Frequencies.

Avaya Wireless AP-4/5/6 User's Guide

Troubleshooting