Avaya AP-4 User Manual page 323

6. Perform the
will reset the unit to "DHCP" mode. If there is a DHCP Server on
the network, the DHCP Server will assign an IP Address to the AP.
HTTP (browser) or Telnet Interface Does Not Work
1. Make sure you are using a compatible browser:
— Microsoft Internet Explorer 6 with Service Pack 1 or later
— Netscape 6.1 or later
2. Make sure you have the proper IP address. Enter your
Access Point's IP Address in the browser address bar, similar to
this example:
http://192.168.1.100
When the Enter Network Password window appears, leave the
User Name field empty and enter the HTTP password in the
Password field. The default HTTP password is "public".
3. Use the CLI over the serial port to check the IP Access Table,
which can be restricting access to Telnet and HTTP.
Avaya Wireless AP-4/5/6 User's Guide
Reset to Factory Default Procedure
Symptoms and Solutions
in this guide. This
7-7