Avaya AP-4 User Manual page 470

Wireless Interface SSID/VLAN/Security Commands
To configure an SSID and VLAN pair, and the security mode associated
with the pair, use the following command:
Syntax:
Example:
Depending on the configured security mode, the following parameters
must be configured:
Security
Mode Key 0 Key 1
None Inactive
802.1x Inactive
Mixed Inactive
WPA Inactive
WPA-PSK Inactive
WEP Active
NOTE:
If you have two or more SSIDs per interface with a security mode of
None, be aware that security being applied in the VLAN is not being
applied in the wireless network.
A-124
[Device-Name]> set wifssidtbl <index>
<ssidindex> <ssid> <vlanid> <status> <secmode>
<encryptkey0> <encryptkey1> <encryptkey2>
<encryptkey3> <encryptkeytx> <encryptkeylength>
<rekeyint> <pskey> <passphrase>
[Device-Name]> set wifssidtbl 3 2 Engineering
1050 enable WPA
Key 2 Key 3
Inactive Inactive Inactive
Inactive Inactive Inactive
Active Inactive Inactive
Inactive Inactive Inactive
Inactive Inactive Inactive
Inactive Inactive Inactive
Key Rekeying
Tx Key Length Interval
Inactive Inactive Inactive
Inactive Active Active
Inactive Active Active
Inactive Inactive Inactive
Inactive Inactive Inactive
Inactive Inactive Inactive
Avaya Wireless AP-4/5/6 User's Guide
PSK Pass
PSK
Phrase
Value
Inactive Inactive
Inactive Inactive
Inactive Inactive
Inactive Inactive
Active Active
Inactive Inactive