Avaya AP-4 User Manual page 459

Hide thumbs Also See for AP-4:

Table of Contents

Enable/Disable Interference Robustness (802.11b Only)

[Device-Name]> set wif <index> interrobust <enable/disable>

Enable/Disable Load Balancing (802.11b Only)

[Device-Name]> set wif <index> ldbalance <enable/disable>

Enable/Disable Medium Density Distribution (802.11b Only)

[Device-Name]> set wif <index> meddendistrib <enable/disable>

Set the Distance Between APs (802.11b Only)

[Device-Name]> set wif <index> distaps <large, medium, small,

minicell, microcell>

[Device-Name]> reboot

The distance between APs should not be approximated. It is

calculated by means of a manual Site Survey, in which an AP is set

up and clients are tested throughout the area to determine signal

strength and coverage, and local limits such as physical

interference are investigated. From these measurements the

appropriate cell size and density is determined, and the optimum

distance between APs is calculated to suit your particular business

requirements.

Avaya Wireless AP-4/5/6 User's Guide

802.11b Wireless Interface Commands

Troubleshooting