Avaya AP-4 User Manual page 242

Configure Multiple SSID/VLAN/Security Mode Entries
2. Enter a Re-keying Interval.
The Re-keying Interval determines how often a client's encryption
key is changed and can be set to any value between 60 - 65535
seconds. Rekeying frustrates hacking attempts without taxing
system resources. Setting a fairly frequent rekey value (900
seconds=15 minutes) effectively protects against intrusion without
disrupting network activities.
3. Place a check mark in the box labeled Enable Encryption (WEP).
4. Configure Encryption Key 1 only (i.e., do not configure Keys 2
through 4). Keep in mind the following:
— For 64-bit encryption, an encryption key is 10 hexadecimal
characters (0-9 and A-F) or 5 ASCII characters (see
Character
— For 128-bit encryption, an encryption key is 26 hexadecimal
characters or 13 ASCII characters.
— For 152-bit encryption, an encryption key is 32 hexadecimal
characters or 16 ASCII characters.
Enable WPA Mode
Follow this step to enable WPA on an SSID/VLAN pair:
1. Set Security Mode to WPA.
4-144
Chart).
Avaya Wireless AP-4/5/6 User's Guide
ASCII