Table of Contents
Advertisement
Computer Interface
Alarm Modes
The alarm modes are as follows:
Off
System ignores the alarm.
On
When an alarm is set to On, the system does three things each time an alarm occurs:
•
records an occurrence of the alarm in the Alarm Log File,
•
displays the alarm on the status bar for 10 seconds,
•
causes the Concierge PC to beep once.
Repeat
An alarm set to Repeat mode behaves like an alarm set to On except that it beeps periodically,
pops open the Alarms dialog, and appears continuously in the status bar until you
acknowledge the alarm through the Alarm dialog. If the alarm dialog is closed or minimized
without being acknowledged, it will reopen periodically until it is acknowledged.
When programmed by the installer, an alarm set to Repeat mode also rings the Message
Waiting administrative telephone and displays an alarm message in its LCD.
Popup
The Popup setting is exactly like the Repeat setting, except that it only occurs once—if the
Alarm dialog is closed or minimized, it will not open again.
When programmed by the installer, an alarm set to Popup mode also rings the Message
Waiting telephone and displays an alarm message in its LCD.
28 – Front Desk Attendant's Guide
Alarms Dialog
GCA70–334
Advertisement
Table of Contents
