Setting A Wakeup Call - Comdial GCA70–33 User Manual

GCA70–334
Retrieving a Message
To retrieve a message using an LCD proprietary telephone,
1. Observe blinking message waiting light.
2. Press the CALL softkey (softkeys are located under the LCD display) to retrieve the
message.
To retrieve a message using a non-LCD proprietary telephone,
1. Observe blinking message waiting light.
2. Press INTERCOM + HOLD to retrieve the message.
To retrieve a message from an IST telephone,
1. Observe blinking message waiting light.
2. Press INTERCOM + voice mail code (default code = #, 00) to retrieve the message.

Setting a Wakeup Call

To set a wakeup call,
1. Dial the feature code (default code = S04).
2. Enter the wakeup time in 00:00 format.
3. Wait for the confirmation tone and hang up.
To cancel a wakeup call,
1. Dial the feature code (default code = S04).
2. Press the # key.
3. Wait for the error tone and hang up.
Guest Telephones
Front Desk Attendant's Guide – 45