Basic Function Menu Operations; Function Menu Operations - Sony PDW-HR1 Operation Manual

Professional disc field station
Hide thumbs Also See for PDW-HR1:
Table of Contents

Advertisement

Refer to the Maintenance Manual for an approximate
guide to when it is time to replace optical heads.
To prevent playback conditions from
deteriorating
Pay attention to the following points when handling discs.
• Do not open disc cartridges and touch discs directly with
your hands.
• Do not store for long periods in locations which are
dusty or exposed to air circulated by fans.
• Do not store for long periods under high temperatures or
in locations exposed to direct sunlight.
If playback conditions have deteriorated
If a yellow or red playback condition mark appears, check
the following points.
Whether the disc displays the same playback condition
on other XDCAM devices: If so, the surface of the
disc may be dirty or scratched, or the performance of
the recording layers on the disc may have worsened
due to age. Do not use discs with these symptoms.
Whether every disc inserted into an XDCAM device
displays the same playback conditions: If so, the
performance of the laser diodes may have
deteriorated. Check the total optical output time.
Basic Function Menu
Operations
The function menu provides access to frequently used
settings, such as input video signal selection and timecode
settings.
Menu settings are stored in nonvolatile memory and are
preserved even after the unit is powered off.

Function menu operations

The function menu appears on the color LCD of this unit.
The following figure shows the buttons used in function
menu operations.
PUSH SET knob
Function buttons (F1 to F6)
Function menu
DISPLAY button
BPAGE and PAGEb buttons
HOME button
To display the function menu
The function menu is made up of the HOME page and
1)
pages P1 to P4, (P5)
, (HOME2)
If the function menu is not already visible, press the
BPAGE, PAGEb, or HOME button to display it. (The
most recently accessed function menu page appears.)
1) If a menu item is assigned using maintenance menu item M38: F-KEY
CONFIG
To display a different page
Each press of the BPAGE or PAGEb button displays the
next function menu page in the order: HOME y P1 y
P2 y P3 y P4 y (P5)
HOME...
1) If a menu item is assigned using maintenance menu item M38: F-KEY
CONFIG
SAVE button
1)
.
1)
1)
y (HOME2)
y

Basic Function Menu Operations

49

Advertisement

Table of Contents
loading

Table of Contents