PDW-HR1 (this unit)
To S400 FAM connector
i.LINK cable (not supplied)
Connections for cut editing
The following figure shows a cut editing system with this
unit as the player.
When making the connections, also refer to the manuals
provided with the equipment to be connected.
See page 40 for more information about editing control
unit settings.
When using an editing control unit
Using the BVE-700/700A
The following figure shows a cut editing system
comprising this unit as the player, an HDW-M2000/
M2000P unit as the recorder, and a BVE-700/700A as the
editing control unit.
38
Connections and Settings
Use of a shielded cable is recommended.
Laptop computer