Sony PDW-HR1 Operation Manual page 122

When the "AUTO NAMING" sub item of setup menu
item 036 is set to "C****"
When the "AUTO NAMING" sub item of basic menu item
036 is set to "title"
1
Before you start, set the "TITLE" sub item of setup
menu item 035 CLIP TITLE NAMING SELECT to
"enable", and set a title (see the previous section).
2
Press the MENU button.
3
Turn the PUSH SET knob to select setup menu item
036.
4
Turn the PUSH SET knob to move the "*" to the left
of the item names to "NAMING FORM".
The "*" indicates the selected item.
5
Turn the PUSH SET knob to select "free", and press
the knob.
You are now able to use clips and clip lists with user-
defined names.
6
Turn the PUSH SET knob to move the "*" to the left
of "AUTO NAMING", and press the knob.
122
Overview
C0001.MXF
TITLE00001
TITLE00001.MXF
TITLE00001
7
Turn the PUSH SET knob to select "title", and press
the knob.
8
Press the SAVE function (F5) button.
The same name will now be given to newly recorded
clips.
To use clips and clip lists with user-defined
names over FAM and FTP connections
Carry out steps 2 to 5 of "To assign clip names on this
unit", and then press the SAVE function (F5) button.
It is now possible to write, transfer, and rename clips and
clip lists with user-defined names over file access mode
(FAM) connections (page 123) and FTP connections
(page 126).
Fuji.MXF
Able to use clips with user-defined names
over FAM and FTP connections
Sakura.SMI
Able to use clip lists with user-defined names
over FAM and FTP connections
To check clip names
Press the THUMBNAIL/ESSENCE MARK button to
display the thumbnail screen, and select the clip whose
name you want to check.
The name of the selected clip appears at the upper left of
the screen.
See "Thumbnail Operations" (page 72) for more
information about the thumbnail screen.
Note
The item at the upper left of the screen is displayed
according to the following order of priority.
Title >User-defined clip name >Standard format clip name
Therefore, the display of this item changes as following,
depending on whether there is a title.
- When a title has been set as a clip name on this unit, for
clips recorded on this unit, the title is displayed.
- The user-defined name or standard format name is
displayed for clips without a title.