Sony PDW-HR1 Operation Manual page 142

Menu items in the 100s, relating to the control panels (OPERATIONAL PARAMETER)
Item number Item name
131 AUDIO VOLUME
Sub-item
1 REC
2 PB
140 AREA MARKER
142 REPEAT MODE
143 INDEX PICTURE POSITION
145 MODE KEY ENABLE DURING
RECORDING
146 POWER SAVE MODE
Sub-item
1
150 REC MODE
Sub-item
1 DISC EXCHANGE
2 CLIP CONTINUOUS
151 GUI OPERATION
142
Setup Menu
DRIVE
Settings
Select whether each of the ALL/CH-1 and CH-2 to CH-4 adjustment
knobs on the control panel is enabled, allowing you to adjust the audio
recording and playback levels of each channel individually, or whether
the ALL/CH-1 adjustment knob alone functions as a master control to
control the audio levels of all channels at once.
Make settings for the recording ALL/CH-1 and CH-2 to CH-4 adjustment
knobs.
each: Each of the ALL/CH-1 and CH-2 to CH-4 adjustment knobs is
enabled, allowing you to adjust each channel individually.
all: The ALL/CH-1 adjustment knob alone functions as a master control.
When you select "all", the ALL indicator to the left of the ALL/CH-1
adjustment knob lights.
Make settings for the playback ALL/CH-1 and CH-2 to CH-4 adjustment
knobs.
each: Each of the ALL/CH-1 and CH-2 to CH-4 adjustment knobs is
enabled, allowing you to adjust each channel individually.
all: The ALL/CH-1 adjustment knob alone functions as a master control.
When you select "all", the ALL indicator to the left of the ALL/CH-1
adjustment knob lights.
Select whether to display the display area of SD output on the color LCD.
off: Do not display.
on: Display.
Put the unit into repeat playback mode, or exit from repeat playback
mode.
off: Exits from repeat playback mode.
play: Puts the unit into repeat playback mode.
Select the frame of the clip to use as the thumbnail image (index picture)
when recording.
0sec to 10sec: Can be set in the range from 0 seconds (first frame of
the clip) to10 seconds, in units of 1 second.
Select whether the STOP button and PAUSE button are the only buttons
that stop recording.
ena (all enable): Recording stops when the EJECT button
button, STOP button, PAUSE button, SHUTTLE/JOG button, and
b)
VAR/JOG button are pressed.
s&p (stop & pause): Recording stops only when the STOP button or
PAUSE button is pressed.
Select whether to put the unit into power saving mode when it enters
stop mode, by turning power supply on or off for each of the components
in the sub-items.
Select whether to supply power to the drive.
stby: Supply power (do not put this unit into power saving mode).
save: Do not supply power (put this unit into power saving mode).
Set the recording functions of sub-items.
off: Disable the disc exchange cache function.
on: Enable the disc exchange cache function.
off: Disable the Clip Continuous Rec function.
on: Enable the Clip Continuous Rec function.
Select whether to disable the display of the Thumbnail Menu and Disc
Menu when this unit is in any mode other than stop mode.
ena (enable): Do not disable.
stop (via stop): Enable the display of menus in the stop mode.
dis (disable): Disable.
a)
, PLAY