Sony PDW-HR1 Operation Manual page 171

When a disc is inserted
Alarm message in time
data display area
Unknown FS!
No FS!
ILL. Disc!
Salvage NG!
Salvage XXXX
Over DUR!
No Support!
ILL. Index!
Formatting!
FORMAT NG!
DI read err
Read err
DRV ADJ err
During control panel operations
Alarm message in time
data display area
a)
KEY INHI.!
a)
REMOTE!
a)
No Disc!
Alarm message in video monitor screen Description/action
UNKNOWN FILE SYSTEM.
PLEASE FORMAT DISC OR EJECT.
NO FILE SYSTEM.PLEASE EJECT DISC. Eject the disc.
IRREGULAR DISC IS USED.
USE PROFESSIONAL DISC.
IRREGULAR DISC IS USED.
PLEASE EJECT DISC.
CLIP SALVAGE WAS NOT COMPLETED. See "Handling of discs when recording does not end
DISC CANNOT BE RECORDED.
FORMAT DISC OR CONTACT SERVICE
TO RUN CLIP SALVAGE PROGRAM.
(XXXX)
EXCESSIVE DURATION IS IN DISC.
RECORDING AND PLAYBACK IS NOT
POSSIBLE.
FORMAT NOT SUPPORTED.
RECORDING AND PLAYBACK IS NOT
POSSIBLE.
INDEX FILE ERROR.
PLEASE FORMAT DISC OR EJECT.
AUTO FORMATTING IS EXECUTING.
AUTO FORMATTING WAS NOT
COMPLETED.
CANNOT READ DISC INFORMATION.
PLEASE EJECT DISC.
CANNOT PERFORM AUTO DRIVE
ADJUSTMENT.
Alarm message in video monitor screen Description/action
KEY INHIBIT MODE IS SELECTED.
SET KEY INHIBIT SWITCH TO OFF.
REMOTE MODE IS SELECTED.
SET REMOTE/LOCAL/NETWORK
SWITCH TO LOCAL.
NO DISC.
Format the disc, or eject it (see page 92).
Use a Professional Disc.
normally (salvage functions)" (page 58).
Data in excess of the rated capacity is recorded on
the disc.
A disc in an unsupported recording format is loaded.
Use a disc formatted in the MPEG HD422 format.
Format the disc, or eject it (see page 92).
Wait until the format has been completed and try
again.
Eject the disc and insert it again, or insert another
disc.
This appears when the KEY INHI switch is "on".
Set the KEY INHI switch to "off".
Set the remote control switch to "LOCAL".
Insert a disc and try again.
171
Troubleshooting