Direct Ftp Function - Sony PDW-HR1 Operation Manual

Professional disc field station
Hide thumbs Also See for PDW-HR1:
Table of Contents

Advertisement

Video monitor display mode
You can set a video output to display on the video monitor
to either HD or SD.
Built-in stereo speakers
The unit features built-in speakers, allowing you to check
recorded audio. You can check your clips and editing
results on the color LCD and speakers even when no
monitors or separate speakers are available.
Compact size, lightweight and battery-powered
operation
The PDW-HR1 is small and light enough to carry out into
the field. It can be operated with batteries, allowing you to
start work immediately in the field.
Cache recording for seamless disc exchanges
About 30 seconds (this duration may differ depending on
the state of a disc) of video and audio data can be recorded
to the unit's internal memory cache during a disc
exchange, and then written back to the newly loaded disc.
This allows seamless recording across extended recording
sessions, including recording of video feeds, with no
important scenes lost while discs are being exchanged.
IT friendly
Computer access to files (file access mode)
Video and audio clip data are recorded as files. The FAM
function enables quick random access by computers to the
video, audio, and metadata files stored on Professional
Discs, with the ability to display thumbnail lists on the
computer screen and perform file-based reads and writes.
Equipped with network connector
The unit features a Gigabit Ethernet connector as standard
equipment. Via this connector, you can connect the unit to
computers and networks to enable listing of the video,
audio, and metadata files recorded on the Professional
Disc, and rapid file transfers. Support for FTP commands
makes it easy to carry out network file transfers from
remote locations.

Direct FTP function

You can use this unit as a local FTP host to send and
receive MXF files to and from other XDCAM devices or a
server, without using a computer. This function is
available through simple operations on the GUI screen.
User data recording mode
User data (files other than XDCAM AV files) can be
recorded on Professional Discs as PC data via the i.LINK
or FTP interface. This allows Professional Discs to be used
as data recording media, with a data storage capacity of
46.4 GB (when dual-layer PFD50DLA discs are used).
Supports a variety of interfaces
This unit supports the following interfaces.
• HDSDI video, 8-channel audio input and output
12
Features
• SDSDI video, 8-channel audio input and output
(the SD/HDSDI INPUT connector doubles as an SDSDI
input connector)
• SD composite input and output
• Analog audio 4-channel input and output
• Remote
- RS-422A (D-sub 9-pin × 1)
Video process control is available from the control
panel.
• i.LINK TS (HDV) input and output (when the PDBK-
202 option board is installed)
• DVB-ASI TS input and output (when the PDBK-202
option board is installed)
• HDMI output

Advertisement

Table of Contents
loading

Table of Contents