Sony PDW-HR1 Operation Manual page 144

Item number Item name
308 SELECTION OF STD/NON-STD
FOR COMPOSITE VIDEO IN
320 DIGITAL AUDIO PB PROCESS ON
EDIT POINT
345 EDITING MODE
346 PLAYER SELECT
347 INPUT VOICE CH
348 OUTPUT VOICE CH
Item number Item name
401 FUNCTION MODE AFTER CUE-UP Select the state that the unit goes into after a cuing-up operation.
144
Setup Menu
Menu items in the 300s, relating to editing operations (EDITING)
Settings
Select the STD or NON-STD mode in accordance with a composite
video input.
STD (forced STD): The STD mode is always used (forced STD mode).
N-STD (forced non-STD): Use this setting when the input video signal
Notes
• When using a VCR with no built-in time base corrector (e.g. a home-
use VHS-system VCR), select "N-STD".
• When this item is set to "N-STD", the following limitations apply,
because this unit's sync reference signal generator always
synchronizes to an internal sync reference signal (see page 43).
- It is not possible to record VITC, wide picture information, or closed
captions, which is multiplexed into the vertical blanking interval of
composite video signals.
- Lip-sync delays (delays in the synchronization of video and audio)
may occur.
Select the treatment of audio playback at edit points.
cut: Carry out a cut (possibly resulting in audio discontinuities at the edit
fade: Fade out and fade in.
Selects the edit mode in edit list editing.
ovl (overlay): Overlay mode
ins (insert): Insert mode
Selects the source of the clips to be used as material.
clip (disc(clip)): Clips (video and audio data) on a disc inserted into the
ext (external): External device
voice (disc(voice)): Audio (audio data, distinct from clips) on a disc
sxs (SxS): Clips (video and audio data) on an SxS memory card
Note
The settings "voice (disc(voice))" and "sxs (SxS)" appear when the
PDBZ-UPG03 Software Upgrade Key or PDBK-MK1 option board is
installed.
Selects the audio input channel.
CH 1 to CH 8
Note
This appears when the PDBZ-UPG03 Software Upgrade Key or PDBK-
MK1 option board is installed.
Selects the output channel for a voice track.
CH 1 to CH 8
Notes
• This appears when the PDBZ-UPG03 Software Upgrade Key or
PDBK-MK1 option board is installed.
• The current setting of this item at the start of editing is applied across
the entire edit list. It is not possible to change this setting for different
voice data segments.
Menu items in the 400s, relating to preroll (PREROLL)
Settings
stop: Stops (the stop mode).
still: Still playback (in jog and shuttle mode).
is unstable (forced NON-STD mode).
point).
recorder
inserted into the recorder
inserted into the recorder