P2 Audio Page - Sony PDW-HR1 Operation Manual

Item Setting
F3: WFM Makes settings related to display of the
waveform monitor or vectorscope. (The
waveform monitor or vectorscope appear
only when the display is showing the
video monitor.)
Sub-Item
F1: MODE
F2: POSITION
F3: BG
F4:
F5:
F6: EXIT
F4: OUT REF Selects the reference signal for the
output signals of this unit.
REF: Use the signal input to the
REF.VIDEO INPUT connector as the
output reference signal.
INPUT: Use the input video signal as the
output reference signal.
F5: SYNC Sets the sync phase of HD output
signals. While the setting value is
flashing, turn the PUSH SET knob to
adjust the sync phase of output signals
with respect to the input reference signal,
over the range ±15 µs. (The display
shows –128 to +127.)
F6: FINE Makes fine adjustment to the sync phase
of HD output signals. While the setting
value is flashing, turn the PUSH SET
knob to adjust the sync phase of output
signals with respect to the input
reference signal, over the range ±200 ns.
(The display shows 0 to 1023.)
a) When V INPUT is set to "SG", "SDI" cannot be selected for AU INPUT
on the P2 AUDIO page.
b) The settings of setup menu item 950 UP CONVERTER MODE are
reflected.
c) The settings of setup menu item 930 DOWN CONVERTER MODE are
reflected.
d) Does not appear when a GUI screen is being displayed.

P2 AUDIO page

Display mode
OFF: Display neither.
WFM: Waveform
d)
monitor
VEC75%: 75% color
bar signal
d)
vectorscope
VEC100%: 100% color
bar signal
d)
vectorscope
Display position
R.B.: Right bottom
R.T.: Right top
L.T.: Left top
L.B.: Left bottom
Background
BLACK: Black
(opaque)
HALF: Transparent
–
–
Exits the waveform
monitor/vectorscope
display settings sub
menu.
Item Setting
F1: AU INPUT Selects the audio input signal to assign
to audio channels 1 to 8.
SDI: Audio signal embedded into SDI
signal
ANALOG1: Analog 1 audio signal
SG: Test signal from internal signal
generator
i.LINK: i.LINK signal (when the PDBK-
202 option board is installed)
DVB-ASI: DVB-ASI signal (when the
PDBK-202 option board is installed)
Sub-item
F1: A1
INPUT (A5
INPUT)
F2: A2
INPUT (A6
INPUT)
F3: A3
INPUT (A7
INPUT)
F4: A4
INPUT (A8
INPUT)
F5: A5-A8
(A1-A4)
F6: EXIT
F2: REC VOL Sets the recording audio level of audio
channels 5 to 8.
The recording audio level can be
adjusted within the range from –200 to
+200 (–∞ to +12 dB) by turning the PUSH
SET knob.
Sub-item
F1: A5 VOL Recording audio level of
F2: A6 VOL Recording audio level of
F3: A7 VOL Recording audio level of
F4: A8 VOL Recording audio level of
F5:
F6: EXIT
Input signal of audio
channel 1 (5)
Input signal of audio
channel 2 (6)
Input signal of audio
channel 3 (7)
Input signal of audio
channel 4 (8)
Switches to the sub menu
for setting channels 5 to 8
(1 to 4).
Exit the audio input signal
selection sub-menu.
a)
audio channel 5
audio channel 6
audio channel 7
audio channel 8
–
Exit the recording audio
level setting sub-menu.
Basic Function Menu Operations
51