Maintenance Menu; Items In The Maintenance Menu - Sony PDW-HR1 Operation Manual

Maintenance Menu

Items in the maintenance menu

The following tables show the items in the maintenance
menu.
• Item names are the names which appear on the video
monitor of this unit and an external monitor to which the
output of the COMPOSITE OUT connector, the SDSDI
OUTPUT connector, or the HDSDI OUTPUT 2
(SUPER) connector is input.
• The values in the Settings columns are the values which
appear in the time data display area. (The values may
Item
M30: SOFTWARE VERSION
M31: SERIAL NUMBER
M32: FAN MODE
M33: FILE I/F PROAV DISPLAY
CONFIG
PC REMOTE
M36: HOUR METER RESET
appear in a different format on an external monitor. In
this case, the external monitor values are shown in
parentheses.) Underlined values are the factory defaults.
This manual does not explain the menu items in M0:
CHECK, M1: ADJUST, M2: SERVICE SUPPORT, and
M6: DRIVE. Refer to the Maintenance Manual for an
explanation of these items.
M3: OTHERS: Other setting items
Setting
Display of the software version of this unit
Display of the serial number of this unit
Selects the control method for the cooling fan.
auto: Control the rotation of the fan automatically according to the temperature
inside the unit.
R-off (Rec-off): Stop the fan in recording mode.
off: Leave the fan stopped always.
Note
Even when "R-off" or "off" is selected, the fan does not stop when temperatures
inside the unit are high.
Selects whether or not to display PROAV directory.
DISABLE: Do not display PROAV directory.
ENABLE: Display PROAV directory.
Disables or enables a FAM connection.
ENABLE: Enable a FAM connection.
KEY SELECT: Enable or disable a FAM connection using the PC REMOTE
button on the control panel.
Display and reset of the hours meter and the thread counter
157
Maintenance Menu