Clip Information - Sony PDW-HR1 Operation Manual

b Remaining memory capacity
This is a popup window that display the remaining
capacity of the unit's internal memory. The popup window
appears only when the disc exchange cache function is
enabled and a disc is being exchanged.
c Recording format
Displays the system frequency at the time of recording, the
video format, and the audio format.
When "CLIP CONTINUOUS" (Clip Continuous Rec
function) sub-item on setup menu item 150 is set to "on",
the "CONT" display flashes, and changes to lit during
recording.
See page 58 for more information about the Clip
Continuous Rec function.
Clip Continuous Rec indication
Audio format
d Clip information
Displays the following information about clips.
System frequency
Video format
Audio format
Total number of clips on disc
Current clip number
Clip name
Remaining playback time
of all clips or clip list
Clip names are displayed according to the setting of
Settings >Display Title in the Disc Menu (see page 70).
System frequency
Video format
The following characters can be displayed as clip names in
this area.
• Digits: 0 to 9
• Alphabetic characters: a to z, A to Z
• The following symbols: !, ", #, $, %, &, ', (, ), *, +, ,
(comma), -, . (period), /, : (colon), ; (semicolon), <, =, >,
?, @, [, ], ^, _, {, |, }, ~
• Space
1 System information
1 Date and time
2 Remote interface
6 Single clip playback indication
5 Disc exchange cache indication
4 Menu setting status
a Date and time
Displays the current date and time.
b Remote interface
When the remote control switch is set to "REMOTE",
displays the name of the interface selected with setup
menu item 214 REMOTE INTERFACE.
c Power status
Displays the status of power supply to the unit.
Display Power status
AC power
AC power (power
saving mode)
DC power
DC power (power
saving mode)
Battery
Battery (power
saving mode)
d Menu setting status
Displays the current setting status of setup menu.
Display Description
BANK1 The current menu settings are the same as the
settings in menu bank 1.
3 Power status
Notes
–
–
• Remaining capacity
expressed by length of bar
• Flashing (1 Hz): Almost
exhausted
• Flashing (4 Hz): Exhausted
Display Panel
25