Sony PDW-HR1 Operation Manual page 150

Item number Item name
731 WIDE MODE
Sub-item
1
2
740 MASTER LEVEL (HD)
741 Y LEVEL (HD)
742 PB LEVEL (HD)
743 PR LEVEL (HD)
745 SETUP LEVEL (HD)
746 SYNC PHASE (HD)
747 FINE (HD)
a) The "Y-add" function is a circuit operation to interpolate the video signal
vertically during jog or variable speed playback for the purpose of
reducing the vertical movement of the playback picture.
150
Setup Menu
Menu items in the 700s, relating to video control (VIDEO CONTROL)
INPUT
OUTPUT
Settings
Specify whether to record and play back with the addition of wide picture
information.
Select whether to save wide picture information to the disc when
recording.
auto: Automatically save wide picture information when it is detected in
the selected input video signal.
on: Always save wide picture information.
off: Never save wide picture information.
Select whether to add wide picture information to the signal output.
thru: Do not add, as specified below.
• Do not add wide picture information to video output signals. Output
with no change.
• Do not add wide picture information to down-converted output.
auto: Add under the conditions specified below.
• Add wide picture information to video output signals automatically
when wide picture information is detected.
• Add wide picture information to video output signals when down-
converter output is set to squeeze mode.
Notes
• To add wide picture information to the output signal, another setting is
required in addition to this item. In setup menu item 703, set line 16
(59.94i/59.94P/29.97P mode (J)), line 20 (59.94i/59.94P/29.97P mode
(UC)), or line 23(50i/50P/25P mode) to "thru".
• In 59.94i/59.94P/29.97P mode (J), output of wide picture information is
given priority if the VITC insertion line is set to line 16 in setup menu
item 601 or 602.
• In 59.94i/59.94P/29.97P mode (UC), output of wide picture information
is given priority if the VITC insertion line is set to line 20 in setup menu
item 601 or 602.
Adjust the high-definition video signal output from the HDSDI OUTPUT 1,
2 (SUPER) connectors. This adjusts the Y, PB, and PR levels
simultaneously.
–2048 (–2048 (DEC)) to 0 (0 (DEC)) to 846 (846 (DEC))
Adjust the Y level of the high-definition video signal output from the
HDSDI OUTPUT 1, 2 (SUPER) connectors.
–2048 (–2048 (DEC)) to 0 (0 (DEC)) to 846 (846 (DEC))
Adjust the PB level of the high-definition video signal output from the
HDSDI OUTPUT 1, 2 (SUPER) connectors.
–2048 (–2048 (DEC)) to 0 (0 (DEC)) to 846 (846 (DEC))
Adjust the PR level of the high-definition video signal output from the
HDSDI OUTPUT 1, 2 (SUPER) connectors.
–2048 (–2048 (DEC)) to 0 (0 (DEC)) to 846 (846 (DEC))
Adjust the setup level of the high-definition video signal output from the
HDSDI OUTPUT 1, 2 (SUPER) connectors.
–272 (–272 (DEC)) to 0 (0 (DEC)) to 272 (272 (DEC))
Control the H sync phase of the high-definition video signal output from
the HDSDI OUTPUT 1, 2 (SUPER) connectors.
–128 (–128 (DEC)) to 0 (0 (DEC)) to 127 (127 (DEC))
Fine control the H sync phase of the high-definition video signal output
from the HDSDI OUTPUT 1, 2 (SUPER) connectors.
0 (0 (DEC)) to 1023 (1023 (DEC))