Default Settings - Sony PDW-HR1 Operation Manual

Menu control Functions
buttons
Function buttons RETURN: Goes up one level.
F1 to F6 SELECT: Selects an item.
(The function to UP: Skips back 100 or 50 items in the
be displayed list of menu items.
varies depending DOWN: Skips forward 100 or 50 items
on the situations.) in the list of menu items.
SAVE: Saves a new setting to memory.
EXIT: Exits the current menu.
–: Changes a setting.
+: Changes a setting.
RESET button • Returns the current setting to the
factory default.
• Answers "No" to a question.
To change the settings of menu items
Proceed as follows to change the settings of menu items.
1
Use the PUSH SET knob to select the required item.
Example: Screen display when item 005 DISPLAY
INFORMATION SELECT is selected
K E Y P A R A M E T E R
0 O 1 : P - R O L L T I M E -
0 0 2 : C H A R A H - P O S -
0 0 3 : C H A R A V - P O S -
* 0 0 5 : D I S P L A Y S E L - T & C N T
0 0 6 : L O C A L E N A
0 0 7 : D I S C T I M E R
0 0 9 : C H A R A T Y P E
0 1 1 : C H A R A S I Z E
0 1 2 : C O N D D I S P L Y -
0 1 3 : S Y S T E M F R E Q -
0 1 6 : A L A R M
2
Press the PUSH SET knob or the SELECT function
button (F2).
This displays the setting screen 2 for the menu item
selected in step 1.
Example: Setting screen display when item 005
DISPLAY INFORMATION SELECT is selected
I T E M - 0 0 5
D I S P L A Y I N F O R M A T I O N
S E L E C T
t i m e d a t a & C N T
Current setting
3
Use the PUSH SET knob or the +/– function button
(F3 or F4) to change the setting.
Current setting
5 s
0 A
2 E
- s t & e j
- + - 1 2 H
- w h i t e
- x 1
d i s
o f f
- o n
4
To change other settings, press the PUSH SET knob or
the SELECT function button (F2) to return to the
previous screen, then repeat steps 1 to 3.
5
When you have completed the settings, press the
SAVE function button (F5).
The message "NOW SAVING..." appears on the video
monitor display, and "Saving..." appears in the time
data display area, while the new settings are saved in
memory. When the saving operation is completed, the
video monitor display and the time data display area
return to their normal indications.
Notes
• If you power off the unit before a save operation is
completed, settings may be lost. Wait until the save is
completed before powering off the unit.
• If, instead of pressing the SAVE function button (F5),
you press the MENU button, the new settings are not
saved. The message "ABORT !" appears on the video
monitor display and "Abort !" in the time data display
area for about 0.5 seconds, and the system exits the
menus. To change more than one setting, be sure to press
the SAVE function button (F5) after making the settings.
To return menu settings to their factory

default settings

After changing menu settings, use the following procedure
to return the settings to their factory default settings
(setting initialization).
To return all settings to their factory default
settings
1
Press the MENU button to display the setup menu.
2
Press the RESET button.
A message appears, to confirm whether you wish to
return all settings to their factory default settings.
Message on the video
monitor display
Message in the time data
display area
3
Press the SAVE function button (F5).
The message "NOW SAVING..." appears on the video
monitor display, and "Saving..." appears in the time
data display area, while the settings of all items are
returned to their factory default settings. These factory
default settings are saved in memory.
Initialize all items to factory
preset values?
Init setup?
Setup Menu
139