Kyocera TASKalfa 3551ci Operation Manual page 405

Setup and Registration (System Menu) > System Menu
Item
Sleep Timer
Interrupt Clear Timer
Error Job Skip
Error Clear Timer
1
Unusable Time*
Sleep Level
Sleep Rules
Set amount of time before entering Sleep.
Value:
For Europe
3051ci: 1 to 60 minutes (1 minute increments)
3551ci/4551ci/5551ci: 1 to 120 minutes (1 minute increments)
Except for Europe
1 to 240 minutes (1 minute increments)
Set the period after which the machine reverts to Normal mode when it has been set to
Interrupt Copy mode and then left unused.
Value: 5 to 495 seconds (in 5 second increments)
Set whether a job for which a "Add paper in cassette #" or "Add paper in Multi Purpose tray" error
occurred when the job was started is automatically skipped after a set period of time elapses.
Value: Off, On
NOTE
• When a job is skipped, it is moved to the end of the job queue.
• If [On] is selected, set the time until the job is skipped. The setting range is 5 to 90
(5 second increments).
If you select [On] for Auto Error Clear, set the amount of time to wait before automatically
clearing errors.
Value: 5 to 495 seconds (in 5 second increments)
NOTE
This function is displayed when [Auto Error Clear] is set to [On].
For details, refer to the FAX Operation Guide.
Select the sleep level.
Set the Energy Saver mode to reduce power consumption even more than normal Sleep mode.
Value: Quick Recovery, Energy Saver
NOTE
This function will not be displayed when the optional Network Interface Kit or Fiery controller is
installed.
Select whether to use the Energy Saver mode for the following functions individually:
• Network
• USB Cable
2
• Card Reader*
1
• FAX*
3
• NIC*
• Application
Value: Off, On
NOTE
When the machine has entered sleep mode with Energy Saver setting, it does not wake from sleep mode
when it receives print data from a PC connected by USB cable. Also, the ID card cannot be recognized.
8-55
Description