Color Registration (Page - Kyocera TASKalfa 3551ci Operation Manual

Troubleshooting > Troubleshooting
Drum Refresh
Remove image blur and white dots from the printout.
NOTE
Drum Refresh cannot be performed while printing. Execute Drum Refresh after the printing is done.
1
2
Calibration
Using this function enables printing in the most appropriate color by adjusting hue and color drift in detail. Use
Curve Adjustment (page 10-41)
are not enhanced, use

Color Registration (page

1
2
4
Check that the number "2" (to "3") is printed at the bottom of the pattern and repeat steps 2
to 3 twice to read patterns 2 and 3 in sequence.
5
Press [OK] in the adjustment end confirmation screen.
Display the screen.
1
Press the [System Menu] key.
2
Press [ ], [Adjustment/Maintenance] and then [Next] of "Drum Refresh".
Perform the drum refresh.
Press [Start] to perform Drum Refresh.
when the color is not enhanced even after performing calibration. If the hue and color
10-39).
Display the screen.
1
Press the [System Menu] key.
2
Press [ ], [Adjustment/Maintenance], [ ] and then [Next] of "Calibration".
Perform the calibration.
Press [Start]. "Calibration" begins.
10-42
Tone