Interrupt Copy - Kyocera TASKalfa 3551ci Operation Manual

Taskalfa 3051ci/3551ci/4551ci/5551ci operation guide rev-1 2013.6

Hide thumbs Also See for TASKalfa 3551ci:

Table of Contents

Operation on the Machine > Copying

Interrupt Copy

This function allows you to pause the current jobs in progress when you need to make copies immediately.

When the interruption copy ends, the machine resumes the paused print jobs.

• If the machine is left unused for 60 seconds in interrupt copy mode, interrupt copying is automatically cancelled and

printing resumes.

You can change the delay until interrupt copying is canceled. Change the delay as required.

Interrupt Clear Timer (page 8-55)

• The interrupt copy function may be unavailable depending on the status of document finisher usage. In this case, try

the priority override.

Priority Override (page 6-61)

Configure the settings.

Press the [Interrupt] key.

The current print job is temporarily interrupted.

Place the originals onto the machine for interrupt copy, and configure the copy settings.

Press the [Start] key.

Interrupt copying begins.

When interrupt copying ends, press the [Interrupt] key.

The machine resumes the paused print jobs.

Place original.

Image Quality

Show Quick Links

Table of Contents