Kyocera TASKalfa 3551ci Operation Manual page 140

Preparation before Use > Loading Paper
NOTE
If the optional FAX Kit is installed, the available media types for printing received faxes are as shown below.
Plain, Recycled, Bond, Vellum, Color, Thick, High Quality, Rough and Custom 1 to 8
Set the paper size of the cassette used for fax reception as follows:
Inch models: Press [Auto] and then [Inch].
Metric models: Press [Auto] and then [Metric].
If the above setting is changed, it will not be possible to print faxes.
1
2
Display the screen.
1
Press the [System Menu] key.
2
Press [Cassette/MP Tray Settings].
Configure the settings.
1
In "Cassette/MP Tray Settings", select one of [Cassette 1] - [Cassette 7], and press [Next].
Then in "Paper Size", press [Change].
2
For automatic detection of the paper size, press [Auto] and select [Metric] or [Inch] as the unit.
To select the paper size, press [Standard Sizes 1] or [Standard Sizes 2] and select the paper size.
Cassette/MP Tray Settings - Paper Size
1
When cassette 1 or 2 is selected, a size not displayed in the standard sizes can be set.
Select [Size Entry], press [+], [-] to enter "X" (horizontal) and "Y" (vertical) dimensions. By pressing [#
Keys], you can use the numeric keys.
Cassette/MP Tray Settings - Paper Size
Set cassette paper size.
1
Auto
Standard X(182 - 457)
Sizes 1
Standard
Sizes 2
Size Entry
# Keys
NOTE
[Cassette 3] to [Cassette 7] are shown when the optional paper feeder is installed.
Cancel OK
Y(140 - 304)
mm mm
# Keys
Cancel OK
3-32
2
2