Form Overlay - Kyocera TASKalfa 3551ci Operation Manual

Using Various Functions > Functions

Form Overlay

Layout/Edit
Copy
Prints the original document overlaid with a form or image. Once you scan and register the form, the form is overlaid
onto the original. You can also use a form that is already registered in the Job Box.
Place the original for the form on top of the other originals. When using the optional document processor, the first page
of the originals should be placed on the top.
Item
Off
Select Stored Density
Form
Finishing Image
Select Form*
Scan New Form Density
Finishing Image
* Form must be previously registered in Job Box. For details, refer to
Functions
Custom
Box
Form
10% to 100%
Transparent
Form on Original Image
Original Image on Form
―
10% to 100%
Transparent
Form on Original Image
Original Image on Form
Density:
30%
Original Copy
Density:
100%
Value
Form for Form Overlay on page
6-48
Description
Specify the density of the form to be overlaid.
Press [+] or [-] in "Density".
The form is overlaid on the document.
The form is placed on top of the document.
The form is placed under the document.
Select the form to be overlaid from Job Box.
Press [Select Form] to display the job boxes
that store documents which can be used as a
form. Select the desired form from the list and
press [OK].
Specify the density of the form to be overlaid.
Press [+] or [-] in "Density".
The form is overlaid on the document.
The form is placed on top of the document.
The form is placed under the document.
5-68.