Responding To Printing System Error - Kyocera TASKalfa 3551ci Operation Manual

Troubleshooting > Troubleshooting

Responding to Printing System Error

Error
Code
1020 Machine interface board failure.
Call service.
1030 Failed to connect to the Printing
System.
Check the connection to the
Printing System.
> Printing System power
> Interface cable connection
1031 Failed to connect to the Printing
System.
Check the connection to the
Printing System.
> Interface cable connection
1040 Failed to connect to the Printing
System.
Check the connection to the
Printing System.
> Network cable connection
> Network settings
2000 Failed to connect to the Printing
System.
Check the connection to the
Printing System.
> Both machine and Printing
System
> Firmware versions installed on
the machine and Printing System
Message
—
Is the power switch of Printing
System turned ON?
Is the power cable of Printing
System plugged?
Is the interface cable (DVI)
connected from the machine to
Printing System?
—
Is the network cable connected
from the machine to Printing
System?
Are the network settings correct?
—
Checkpoints
10-37
Corrective Actions
Printing System failure has
occurred. Make a note of the
error code displayed on the touch
panel. Call service.
Turn the power switch of Printing
System on.
Turn the main power switch of the
machine off and check that the
power cable of Printing System is
correctly plugged.
After checking the power cable,
turn the main power switch of the
machine on.
Check that the interface cable is
correctly connected.
Check that the interface cable is
correctly connected. If the error
exists, Printing System failure
has occurred. Make a note of the
error code displayed on the touch
panel. Call service.
Check the network.
• The network cable is connected.
• The hub is not operating
properly.
• The server is not operating
properly.
Press [System Menu], [System],
[Next] of Network and then [Next]
of TCP/IP Setting and configure
the following settings:
• TCP/IP: On
• IPv6: On
Make a note of the error code
displayed on the touch panel.
Call service.