Activating/Deactivating Application - Kyocera TASKalfa 3551ci Operation Manual

Operation on the Machine > Application
2

Activating/Deactivating Application

The procedure is as follows.
1
Install the application.
1
Press [Add].
2
Insert the removable memory containing the application to be installed into the USB Port (A1).
NOTE
When the message "Removable Memory was recognized. Displaying files. Are you sure?"
is displayed, press [No].
3
Select the application to be installed and press [Install].
You can view detailed information on the selected application by pressing [Detail].
4
Press [Yes] in the confirmation screen.
Installation of the application begins. Depending on the application being installed, the installation
may take some time.
Once the installation ends, the original screen reappears.
NOTE
To install another application, repeat steps 2-3 and 2-4.
To remove the removable memory, press [Remove Memory] and wait until the message
"Removable Memory can be safely removed." appears. Then remove the removable
memory.
Display the screen.
1
Press the [System Menu] key.
2
Press [ ] and then [Application].
NOTE
If the user authentication screen appears, enter your login user name and login password
and press [Login]. For this, you need to login with administrator privileges. The factory
default login user name and login password are set as shown below.
Model Name
3051ci
3551ci
4551ci
5551ci
Login User Name
3000
3500
4500
5500
5-12
Login Password
3000
3500
4500
5500