Login/Logout; Login - Kyocera TASKalfa 3551ci Operation Manual

Installing and Setting up the Machine > Login/Logout

Login/Logout

If you are setting a function that requires administrator rights, or if user login administration is enabled, you must enter
your login user name and login password.
NOTE
• The factory default login user name and login password are set as shown below.
3051ci
3551ci
4551ci
5551ci
You will be unable to login if you forget your login user name or login password. In this event, login with administrator
privileges and change your login user name or login password.
• If the guest authentication setting is enabled, the [Authentication/Logout] key must be pressed when logging in.
For details, refer to the

Login

Normal login
1
Model Name
3000
3500
4500
5500
Guest Authorization Set. on page
Enter the login user name and login password to login.
Enter login user name and password.
Local
Login to:
1

Login

abcdef
User Name
2
Login
********
Password
Check Counter
Character Entry Method (page 11-11)
If this screen is displayed during operations, press [Login User Name] to enter the login user
name.
Alternatively, you can login by pressing [Login Password] and entering the login password.
NOTE
[# Keys] can be pressed to enter the number with the numeric keys on the operation panel.
If [Network Authentication] is selected as the user authentication method, either [Local] or
[Network] can be selected as the authentication destination.
To authenticate by ID card, press [ID Card Login].
Login User Name
3000
3500
4500
5500
9-18.
# Keys
# Keys
ID Card
Login
3
Cancel Login
2-21
Login Password